Mini Excavator Tracks
Track tension is an important consideration when operating a mini excavator. If the tracks are too loose, the machine may pop and rock while turning. This will reduce the track power and will also cause extra wear. It is recommended to check the tracks on a regular basis.
A mini excavator for sale tracks are often damaged and need replacement. This can cost anywhere from $300 to $3,000. Regular maintenance will prevent costly downtime and extend the life of your mini excavator’s tracks. To get the right tracks for your mini excavator, shop online. You can save money by avoiding expensive dealer markups. Plus, skid heaven ships replacement tracks directly to your door.
Mini excavator tracks should be replaced after about 1,500 hours of use. Though track replacement is often recommended by manufacturers, proper maintenance will extend their life. Ensure the tracks are kept clean and free of debris. It is also important to check the work site and general upkeep practices.
How Tight Should Mini Excavator Tracks Be?
When adjusting track tension, you should use the boom to lift the side of the excavator and measure the distance between the upper face of the track shoe and the frame. This measurement will determine how much tension the tracks need. A good rule of thumb is that track tension should be able to bend at least 10 mm at the mid-point of the undercarriage.
Another important consideration when checking track tension is the tread pattern. For instance, turf-friendly tracks have more contact points with the ground, while aggressive treads have sharp lugs. This will provide better traction on loose soil and a wider footprint. However, a track should not be so loose that it can be difficult to lift. Taking care to check track tension will protect the machine’s undercarriage.
If the tracks are too loose, they may come off of the machine. This will result in increased downtime, which is detrimental for business. You should also ensure that the tracks are not too tight so that the vehicle can turn easily. Besides, if the tracks are too tight, debris can get caught between the undercarriage and track, stretching it and tearing it apart.
Tracks are the most important part of a mini excavator. They must be strong and reliable in order to perform their tasks. Properly maintained rubber tracks will improve responsiveness and reduce vibrations. This is especially important when working in tough terrain. Rubber tracks can also save you money in the long run.
Tracks also need to be cleaned on a regular basis. Dust, dirt, and other debris can clog their surfaces. Regularly washing the tracks with a pressure washer will eliminate the possibility of debris grinding the track surface. Neglecting to do this can lead to recoil mechanisms breaking or track cables snapping.