epair Concrete Driveway Cracks
Concrete driveway cracks are a big pain to deal with. If left untreated, these small cracks can get worse over time, and in some cases, they can be quite deep. Trying to patch these cracks by simply filling them up isn’t a permanent solution.
A more permanent solution is to repair the cracks with a concrete patching compound. You can use this compound to repair small cracks and fill larger ones. For this task, you will need a concrete patching compound, concrete bonding adhesive, a primer, and an inexpensive paintbrush. When using the patching compound, make sure you clean your brush after each application. In addition, concrete patching compound can stain nearby surfaces, so make sure you wash off any excess with water.
Before you begin patching cracks in your concrete Driveway repair, you should clean it thoroughly. This will remove loose materials and dust. It will also ensure that the repair is more secure and long-lasting. Once you have cleaned the crack, you can apply concrete filler. Be sure to follow the manufacturer’s instructions. Once you’ve done this, you can check the repair to make sure it’s completely filled.
The primary reason to repair cracks in concrete is to prevent water from entering them. Another reason is to improve the aesthetics of the driveway. Most homes have a front-facing driveway, and cracks in concrete can cause a driveway to look unattractive. Cracks can also occur as a result of growing tree roots, impact damage, and weight overload. Most common, however, is standing water, which expands and contracts with temperature.
Why to Repair Concrete Driveway Cracks
Cracks in concrete can cost you thousands of dollars if not repaired. Fortunately, there are several ways to repair these. For starters, you can use a cleaner that contains a grease-cutting agent to treat the cracked concrete. In addition, you can use a sledgehammer to undercut the edges of the cracks.
For bigger cracks, you can use backer rod to fill them. Backer rods are similar to pool noodles, and you can cut them up to fit your crack. The length of the rod should be slightly longer than the width of the crack. Afterward, you can trowel the filler into the crack. Make sure to fill the crack at least a half inch below the surface of the concrete.
Adding a backer rod to the crack before pouring ElastiPoxy will help prevent it from running out. You can also use sand to partially fill the cracks. This will help the epoxy bond to the sides and not to the bottom. Once the cracks have been filled with the epoxy, the surface should be clean. If you have a large crack, you can use a pressure washer, but a garden hose will work as well.
You can also opt to hire a professional to do the repair for you. The cost of concrete driveway crack repair varies according to the size of the crack and the amount of concrete required. On average, you can expect to pay between $65 and $150 per square foot for this process.